Question 1

What is the benefit of the low-temperature galvanizing process? View answer

Asked 1 ´year ago | 65-253 | 1/2" NPT Female Tee

Question 2

What does 100% pressure tested to 300# Class mean? View answer

Asked 1 ´year ago | 65-253 | 1/2" NPT Female Tee

Question 3

How are NPT fittings measured? View answer

Asked 1 ´year ago | 65-253 | 1/2" NPT Female Tee

Question 4

How thick of a panel Witt this work on? View answer

Asked 1 ´year ago | FS2700LN-16-16 | 1" ORFS Male x 1" ORFS Male Bulkhead

Question 5

will this kit work with a 2015 John Deere 1025R View answer

Asked 1 ´year ago | 6 Port MultiFASTER Kit | John Deere 1 Series

Question 6

What does the #4 mean in "3/8" JIC Male #4 SAE/ORB Male 45 degree". View answer

Asked 1 ´year ago | 6802-06-04 | 3/8" JIC Male x #4 SAE/ORB Male 45°

Question 7

Do yall offer seal kits for the 3.5 x 8 cylinder? View answer

Asked 1 ´year ago | Double Acting Tie-Rod Cylinder 3.5" Bore x 8" Stroke NPT Ports (2500 PSI)

Question 8

What is the overall length of this fitting? View answer

Asked 1 ´year ago | SS-6405-16-12 | #16 SAE/ORB Male x 3/4" NPTF Female (Stainless)

Question 9

What size OD hose Will theses wire on? View answer

Asked 1 ´year ago | MP-06-08-43 | 43 Series Interchange 3/8" Hose x 1/2" Male NPTF Rigid

Question 10

What does JIC stand for in hydraulic fittings? View answer

Asked 1 ´year ago

Question 11

What is the inside diameter of the hose fitting? View answer

Asked 1 ´year ago | 3/4" JIC Female Swivel 90° | FJX90-12-12

Question 12

What is the tube size of the JIC female swivel fitting? View answer

Asked 1 ´year ago | 3/4" JIC Female Swivel 90° | FJX90-12-12

Question 13

What is the nominal thread size of the fitting? View answer

Asked 1 ´year ago | 3/4" JIC Female Swivel 90° | FJX90-12-12

Question 14

What angle do the fittings on this product feature? View answer

Asked 1 ´year ago | 3/4" JIC Female Swivel 90° | FJX90-12-12

Question 15

What is the interchangeability of this product? View answer

Asked 1 ´year ago | 3/4" JIC Female Swivel 90° | FJX90-12-12

Question 16

What is the purpose of the JIC 37° female swivel fitting? View answer

Asked 1 ´year ago | 3/4" JIC Female Swivel 90° | FJX90-12-12

Question 17

What are the dimensions of the hose? View answer

Asked 1 ´year ago | 1-1/4" SAE 100R4 Suction Hose by Foot | R4-20

Question 18

Is this hose compatible with Aeroquip products? View answer

Asked 1 ´year ago | 1-1/4" SAE 100R4 Suction Hose by Foot | R4-20

Question 19

What type of hose fittings can be used with this hose? View answer

Asked 1 ´year ago | 1-1/4" SAE 100R4 Suction Hose by Foot | R4-20

Question 20

How do you read a hose size? View answer

Asked 1 ´year ago | 1-1/4" SAE 100R4 Suction Hose by Foot | R4-20

Question 21

Looking for hydrolic fittings charts to hang on my shop wall View answer

Asked 1 ´year ago | CHARTS-VINYL | Hydraulic Fittings Wall Charts (Vinyl)

Question 22

Will this fit a Vio 35 thumb valve View answer

Asked 1 ´year ago | FS6602-08-08-08 | 1/2" ORFS Male x 1/2" ORFS Female x 1/2" ORFS Male

Question 23

What's the pressure rating of these fittings? View answer

Asked 1 ´year ago | 5404N-08-2.5 | Seamless Pipe Nipple, 1/2" NPTF Male x 2.5" Long

Question 24

could you tell me in inches from the flare end to the back of the elbow how long it is. View answer

Asked 1 ´year ago | 6801-04-08 | 1/4" JIC Male x #8 SAE/ORB Male 90°

Question 25

Does your kit include all of the hardware and hose covers like the BXX10283 kit from John Deere? View answer

Asked 1 ´year ago | 6 Port MultiFASTER Kit | John Deere 1 Series

Question 26

can i get this product with 3 inch male camlock fittings View answer

Asked 1 ´year ago | 3 Inch 100 Foot PVC Lay Flat Hose Assembly 70 PSI with Aluminum Pin Lug Brass Nut Set and Center Punch Clamps | Discount Hydrtaulic Hose

Question 27

What is the difference between this part and part 5203S-06 View answer

Asked 1 ´year ago | 5203L-08 | DIN 2353 L (M14x1.5) Tube Plug

Question 28

Do you have the dash sizes up to 32 in this kit? View answer

Asked 1 ´year ago | JIC 37° Cap and Plug Assortment Kit | CPKIT-JIC

Question 29

How long will it take to arrive View answer

Asked 1 ´year ago | 9007-04-06 | 1/4" BSPP Male x 3/8" NPTF Male

Question 30

Is this ID or OD View answer

Asked 1 ´year ago | 360-07 | 7/16" Brass Compression Tube Sleeve

Question 31

DOES THIS WORK WITH SINGLE AND DOUBLE BRAIDED HYDRAULIC HOSES. IS IT COMPATABLE WITH DAYCO CRIMPER View answer

Asked 1 ´year ago | MENDER-04 | 1/4" Hose x 1/4" Hose

Question 32

Does this work with Dayco (E-Z Crimp M) View answer

Asked 1 ´year ago | MENDER-04 | 1/4" Hose x 1/4" Hose

Question 33

What temperature are these good to? View answer

Asked 1 ´year ago | 71-3C-12-12F | Flushface Couplers | 3/4" Female Coupler | Discount Hydraulic Hose

Question 34

can these fittings be crimped with a parker crimper View answer

Asked 1 ´year ago | HHE-KIT | Hydraulic Hose End Assortment Kit | Discount Hydraulic Hose

Question 35

What is the pressure rating for this fitting? View answer

Asked 1 ´year ago | 27205-10-06 | 5/8" Flareless x 3/8" NPTF Male Pipe

Question 36

Are JIC and an fitting compatible? View answer

Asked 1 ´year ago | 6602-06-06-06 | 3/8" JIC Female Swivel Run Tee

Question 37

What does ORB stand for in the context of this product? View answer

Asked 1 ´year ago | #8 SAE ORB Hex Socket Hydraulic Plug | 6409-08

Question 38

What tool is needed to install this plug? View answer

Asked 1 ´year ago | #8 SAE ORB Hex Socket Hydraulic Plug | 6409-08

Question 39

What size thread is a bulkhead fitting? View answer

Asked 1 ´year ago | 2700LN-06-06 | 3/8" JIC Male x 3/8" JIC Bulkhead

Question 40

How do you fit a bulkhead? View answer

Asked 1 ´year ago | 2700LN-06-06 | 3/8" JIC Male x 3/8" JIC Bulkhead

Question 41

What is the pressure rating for bulkhead fittings? View answer

Asked 1 ´year ago | 2700LN-06-06 | 3/8" JIC Male x 3/8" JIC Bulkhead

Question 42

What does JIC stand for in pipe? View answer

Asked 1 ´year ago

Question 43

What size is #4 JIC? View answer

Asked 1 ´year ago | 6400-04-04 | 1/4" JIC Male x #4 SAE/ORB Male

Question 44

What is the tube size of the JIC female swivel fitting? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Question 45

What is the nominal thread size of the JIC female swivel fitting? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Question 46

What type of flare does the JIC female swivel fitting use? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Question 47

What series is the fitting compatible with? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Question 48

What indicates that the fitting is for use with most 2-wire hydraulic hoses? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Question 49

What is the purpose of the number stamped on the shell of these fittings? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Question 50

Can this fitting be used with Parker crimping machines? View answer

Asked 1 ´year ago | 3/8" Hose x 1/2" JIC Swivel, 43 Series | FJX

Browse by Topic

Tools