Question 1

The outer diameter is 2.875 but the tube for the pin sticks out some, so what is the width of that? View answer

Asked 11 ´months ago | 2.5" bore x 22" stroke cross tube hydraulic cylinder

Question 2

Can this reel be used for nitrogen at 2000 psi View answer

Asked 11 ´months ago | P-HP-130 | P Series COXREELS® | Discount Hydraulic Hose

Question 3

dose the 318 | JIC 37° Tube Nut require a sleeve or will it work with a double flare? View answer

Asked 11 ´months ago | 318-06 | 3/8" JIC Tube Nut

Question 4

What is the inside diameter of the hose fitting? View answer

Asked 11 ´months ago | FJX-12-12-43 | 43 Series Interchange 3/4" Hose x 3/4" Female JIC 37° Swivel

Question 5

What is the nominal thread size of the JIC 37° female swivel fitting? View answer

Asked 11 ´months ago | FJX-12-12-43 | 43 Series Interchange 3/4" Hose x 3/4" Female JIC 37° Swivel

Question 6

Does this hose interchange with Weatherhead U Series fittings? View answer

Asked 2 ´months ago | HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)

Question 7

Can I use Standard Crimp Fittings with this hose? View answer

Asked 2 ´months ago | HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)

Question 8

What is the angle of the flare on the JIC 37° female swivel fitting? View answer

Asked 11 ´months ago | FJX-12-12-43 | 43 Series Interchange 3/4" Hose x 3/4" Female JIC 37° Swivel

Question 9

Is this hose compatible with Braided Hose Fittings? View answer

Asked 2 ´months ago | HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)

Question 10

Is the hose resistant to salt water? View answer

Asked 2 ´months ago | HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)

Question 11

What is a JIC 37 degree standard? View answer

Asked 11 ´months ago | FJX-12-12-43 | 43 Series Interchange 3/4" Hose x 3/4" Female JIC 37° Swivel

Question 12

Why is this 20 dollars??? The biggest cap you offer (1.25") is only 11? View answer

Asked 11 ´months ago | 27129-08 | 1/2" Flareless Tube Cap

Question 13

Can this be used with a fuel transfer tank? between the pump and a hose reel?

Asked 2 ´months ago | R4-16-ASB

Question 14

What is the o.d.? What is the bend radius of this hose? View answer

Asked 10 ´months ago | PW6K-06 | 3/8" Black 6,000 PSI Pressure Washer (by the foot) | Discount Hydraulic Hose

Question 15

Are these fittings suitable for hydraulic use (i.e. burst rating, connect, etc.)? View answer

Asked 10 ´months ago | MPX-04-04W | 1/4" Hose x 1/4" NPTF Male Pipe Swivel

Question 16

What does the 1/2 ORFS Male X #12 What does the 12 refer to?refer to View answer

Asked 10 ´months ago | FS6801-08-12 | 1/2" ORFS Male x #12 SAE/ORB Male 90°

Question 17

Are these 3/4inch outside diameter? View answer

Asked 10 ´months ago | SK-MF-14 | Faster Seal Kit (Pack of 2)

Question 18

Since I’m not seeing it I assume you don’t make a 4 port for the 1025R with H120 loader. View answer

Asked 10 ´months ago | 6 Port MultiFASTER Single Point Connector - Fits 2022 and Prior 1025R, 1023E, 2025R | Discount Hydraulic Hose

Question 19

What is special about the cover of this hydraulic hose? View answer

Asked 2 ´months ago | HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)

Question 20

What size is the male pipe fitting? View answer

Asked 10 ´months ago | MP-16-16 | 16U-116 | 1" Hose x 1" NPTF Male Pipe | Discount Hydraulic Hose

Question 21

What type of thread does the male pipe fitting use? View answer

Asked 10 ´months ago | MP-16-16 | 16U-116 | 1" Hose x 1" NPTF Male Pipe | Discount Hydraulic Hose

Question 22

Can I buy this hydraulic hose by the foot? View answer

Asked 2 ´months ago | HT-04 | 1/4" HYDRAULAX TOUGH Hydraulic Hose (by the foot)

Question 23

Does this fitting require a sealing washer or O-ring? View answer

Asked 10 ´months ago | MP-16-16 | 16U-116 | 1" Hose x 1" NPTF Male Pipe | Discount Hydraulic Hose

Question 24

Is this fitting compatible with Weatherhead 16U-116? View answer

Asked 10 ´months ago | MP-16-16 | 16U-116 | 1" Hose x 1" NPTF Male Pipe | Discount Hydraulic Hose

Question 25

How is a leak-free connection ensured with this fitting? View answer

Asked 10 ´months ago | MP-16-16 | 16U-116 | 1" Hose x 1" NPTF Male Pipe | Discount Hydraulic Hose

Question 26

I have some Vevor 3/4 hydraulic hose. ID is 3/4 OD is 1.15. What size crimp do I need to crimp 10143-12-12 fitting

Asked 10 ´months ago | MP-12-12-43 | 43 Series Interchange 3/4" Hose x 3/4" Male NPTF Rigid

Question 27

What is the PSI rating on this fitting

Asked 10 ´months ago | MP-06-06-43 | 43 Series Interchange 3/8" Hose x 3/8" Male NPTF Rigid

Question 28

What is the torque value for this fitting?

Asked 10 ´months ago | 6408-16 | #16 SAE/ORB Hex Head Plug

Question 29

What pressure is rating View answer

Asked 10 ´months ago | 3059-06-06 | 3/8" Male JIC X 3/8" BSP Banjo

Question 30

Is this for hot water. And how hot to resist View answer

Asked 10 ´months ago | AEF38050 | 3/8" Black 50 ft Pressure Washer Hose Assembly | Discount Hydraulic Hose

Question 31

What type of hose fitting is this? View answer

Asked 3 ´months ago | MPX-06-06-43 | 43 Series Interchange 3/8" Hose x 3/8" NPTF Male Pipe Swivel

Question 32

What are hydraulic hose couplers made of? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 33

What does a JIC hydraulic fitting stand for? View answer

Asked 9 ´months ago | FJX45-08-08 | 08U-688 | 1/2" Hose x 1/2" JIC Female Swivel 45

Question 34

What if the connectors and fittings do not match a 3rd party kit? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 35

how wide is the 1/2 bspp banjo bolt. bolt size View answer

Asked 9 ´months ago | 3002-08 | 1/2" Male BSPP Banjo Bolt

Question 36

Does this kit include all components to connect to the Deere OEM 3rd function kit? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 37

Will these work on jd 4052r cab View answer

Asked 8 ´months ago | TTWT JD1SERIES MID/REAR Kit | Discount Hydraulic Hose

Question 38

What additional kits are required for the 5th and 6th lines? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 39

Can this connector be used on other Deere tractors? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 40

DOES THIS TUBE HAVE A UL1820 ? View answer

Asked 8 ´months ago | NT100-05BK

Question 41

price per ???? View answer

Asked 8 ´months ago | Outback Wrap | 2-Pair Brown/Purple Hydraulic Hose Markers

Question 42

how do you determine freight? View answer

Asked 8 ´months ago | R7-03BK-ASB

Question 43

What model years does this product fit? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 44

Is this product compatible with Deere 2038R tractors? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 45

Does the BSPT or NPT side have the flat face? View answer

Asked 8 ´months ago | 9008-12-12 | 3/4" BSPT Male x 3/4" NPTF Male

Question 46

What is the psi rating on this fitting View answer

Asked 8 ´months ago | 27405-08-08 | 1/2" Flareless x 1/2" NPTF Male 90°

Question 47

pressure rating of fittings View answer

Asked 8 ´months ago | 600-08-08S | ISO 7241-1 Series A | Set of 1/2" Quick Disconnects | Discount Hydraulic Hose

Question 48

Is this product compatible with Deere 2032R tractors? View answer

Asked 3 ´months ago | 6 Port MultiFASTER Single Point Connector for Deere 2032R / 2038R

Question 49

If I add a hose label, does that get repeatedly printed down the length of the hose? View answer

Asked 8 ´months ago | R7-03BK-ASB

Question 50

Is this cross compatible with the john deere factory 4 port connector? View answer

Asked 8 ´months ago | 6 Port MultiFASTER Single Point Connector - Fits 2022 and Prior 1025R, 1023E, 2025R | Discount Hydraulic Hose

Browse by Topic

Tools